I-Rotary Drilling Rig KR50

Incazelo emfushane:

Ikhanda lamandla okushayela okukabili, elinetorque ephezulu efinyelela ku-100KN.M, eqinisekisa ukusebenza okunamandla nokusebenza kahle.
I-chassis enwetshiwe (ububanzi obukabili), lapho ububanzi bokusebenza buyi-3600mm ehlaba umxhwele futhi ububanzi bezokuthutha buyi-2600mm elawulekayo. Lo mshini awubonisi nje kuphela ukudlula okuhle kodwa futhi ubonisa ukuzinza okuphezulu kakhulu kwesakhiwo, okuwenza akwazi ukusebenza kahle ezimeni ezihlukahlukene.
Ukujula okuphezulu kokumba kungu-16m okuvelele, futhi inamandla okubona ukwakhiwa kobubanzi obukhulu bokubhola ngokusebenzisa amathuluzi okumba ahlukene nezindlela zokwakha, enikeza ukuguquguquka okukhulu nokuzivumelanisa nezimo.
Ifaka ukudonsa okuphezulu kokuhamba, futhi wonke umshini uvumelana nezimo kakhulu futhi ungakwazi ukuhlangabezana kalula nemfuneko yerempu engu-20° yokushayela okuvamile, iqinisekisa ukunyakaza okungenamthungo ngisho nasezindaweni ezithambekele.
I-chassis iqinile, inesikhungo esiphansi sokudonsela phansi, yenza kube lula ukunyakaza kumabanga amafushane futhi iqinisekise ukuzinza ngesikhathi sokusebenza.

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Ukucaciswa Kwezobuchwepheshe

Ukucaciswa Kwezobuchwepheshe	Iyunithi
I-Max Torque	kN.m	110
Ubukhulu. ububanzi	mm	1200
Ubukhulu. ukujula kokumba	m	20
Isivinini sokujikeleza	rpm	7-30
Ubukhulu. ingcindezi yesixuku	kN	76
Ubukhulu. isixuku sidonsa	kN	90
Ukudonsa komugqa wewintshi oyinhloko	kN	65
Isivinini somugqa wewintshi oyinhloko	m/min	48
Ukudonsa komugqa wewintshi osizayo	kN	20
Isivinini somugqa wewintshi asizayo	m/min	38
I-Stroke(uhlelo lwesixuku)	mm	1100
Ukuthambekela kwensika(lateral)	°	±6
Ukuthambekela kwensiza(phambili)	°	3
Ukuthambekela kwensika(emuva)	°	90
Ubukhulu. ingcindezi yokusebenza	mpa	34.3
Ingcindezi yomshayeli	mpa	3.9
Isivinini sokuhamba	km/h	5.6
Amandla okudonsa	kN	220
Ubude bokusebenza	mm	10740
Ububanzi bokusebenza	mm	2600
Ukuphakama kwezokuthutha	mm	3040
Ububanzi bezokuthutha	mm	2600
Ubude bezokuthutha	mm	12500
Isisindo sisonke	t	28
Ukusebenza kwenjini
Imodeli Yenjini		CumminsQSB7
Inombolo yesilindaUbubanzi besilindaI-Stroke	mm	6×107×124
Ukufuduka	L	6.7
Amandla Alinganiselwe	kw/rpm	124/2050
Ubukhulu. Torque	Nm/rpm	658/1500
I-Emission Standard	U.S.EPA	Isigaba3

Kelly bar	I-Friction Kelly Bar	Ibha ye-kelly ehlanganisiwe
Ngaphandle (mm)		Φ325
Isigaba*ubude ngabunye (m)		4×5.5
Ukujula okuphezulu (m)		20

Imininingwane Yomkhiqizo

Izithombe zokwakha

I-KR50 drilling rig eyenziwe ngokwezifiso yephrojekthi yokuqinisa udonga

Njengoba umfula umatasa, ukwakhiwa kufanele kuqinisekise ukuhamba okuvamile kweminye imikhumbi.

Isendlalelo sokwakha :
Uthuli, ubumba, idwala eliqinile lesimo sezulu
Ukujula kokumba: 11m,
Ukubhoboza ububanzi: 600mm,
Imizuzu engama-30 yeHole eyodwa.