I-Rotary Drilling Rig KR110D

I-chassis yokwandisa (ububanzi obuphindwe kabili). Ububanzi bokusebenza buyi-3600mm, kanti ububanzi bezokuthutha buyi-2600mm. Lo mshini awugcini nje ngokuba nokudlula okuhle kodwa futhi ukhombisa ukuzinza okuphezulu kokwakhiwa, okuqinisekisa ukusebenza kahle ezimeni ezahlukahlukene.
Ifaka i-traction ephezulu yokuhamba ngezinyawo. Wonke umshini uvumelana nezimo kakhulu futhi uyakwazi ukuhlangabezana nemfuneko yerempu engu-20° yokushayela okuvamile, okwenza kube lula ukuhamba kwawo ezindaweni ezihlukahlukene.
Wonke umshini uklanywe ngokucophelela ngokuhambisana ngokuqinile nezindinganiso ze-EU, ngaleyo ndlela ubonisa ukuzinza okuphezulu kokwakhiwa nokuhlangabezana nekhwalithi ephezulu kakhulu nezidingo zokuphepha.
Ifakwe ngokwezifiso injini enamandla amakhulu enekhanda lamandla okushayela okukabili kanye ne-torque enkulu yokukhipha, ekwazi ukufeza izidingo zokwakhiwa kokwakheka okuyinkimbinkimbi nokuqinisekisa ukusebenza kahle okuphezulu kokwakhiwa.
Ngamathuluzi ahlukene okumba nezindlela zokwakha, iyakwazi ukubona ukwakhiwa kobubanzi obukhulu bokumba, inikeze amakhono okwakha ahlukahlukene.
Ifakwe insika ephansi eyenziwe ngokwezifiso, eholela esikhungweni esiphansi samandla adonsela phansi, okuthuthukisa kakhulu ukuzinza kokwakhiwa nokuqinisekisa ukwethembeka nokuphepha komsebenzi.

Imininingwane Yomkhiqizo

I-KR110D/A
Ukucaciswa Kwezobuchwepheshe	Iyunithi
I-Max Torque	kN.m	110
Ubukhulu. ububanzi	mm	1200
Ubukhulu. ukujula kokumba	m	20
Isivinini sokujikeleza	rpm	6-26
Ubukhulu. ingcindezi yesixuku	kN	90
Ubukhulu. isixuku sidonsa	kN	120
Ukudonsa komugqa wewintshi oyinhloko	kN	90
Isivinini somugqa wewintshi oyinhloko	m/min	75
Ukudonsa komugqa wewintshi osizayo	kN	35
Isivinini somugqa wewintshi asizayo	m/min	40
I-Stroke(uhlelo lwesixuku)	mm	3500
Ukuthambekela kwensika(lateral)	°	±3
Ukuthambekela kwensiza(phambili)	°	5
Ukuthambekela kwensika(emuva)	°	87
Ubukhulu. ingcindezi yokusebenza	mpa	35
Ingcindezi yomshayeli	mpa	3.9
Isivinini sokuhamba	km/h	1.5
Amandla okudonsa	kN	230
Ubude bokusebenza	mm	12367
Ububanzi bokusebenza	mm	3600/3000
Ukuphakama kwezokuthutha	mm	3507
Ububanzi bezokuthutha	mm	2600/3000
Ubude bezokuthutha	mm	10510
Isisindo sisonke	t	33
Ukusebenza kwenjini
Imodeli Yenjini		I-CumminsQSB7-C166
Inombolo yesilindaUbubanzi besilindaI-Stroke	mm	6×107×124
Ukufuduka	L	6.7
Amandla Alinganiselwe	kw/rpm	124/2050
Ubukhulu. Torque	Nm/rpm	658/1300
I-Emission Standard	U.S.EPA	Isigaba3

Kelly bar	I-Friction Kelly Bar	Ibha ye-kelly ehlanganisiwe
Ngaphandle (mm)		φ299
Isigaba*ubude ngabunye (m)		4x7
Ukujula okuphezulu (m)		20